So after doing the 2nd head in as little as 4 months (dodgy mechanic not doing the first one right even after i forked out a grand for it ) i have decided its time to do some upgrade work to the old ed. Now i need some advice as to what i need.

Obviously 1st of all i need a new cylinder head . 2nd i do a lot of towing over long distances ( small trailer and racecar weighing around 300kg ) normally 300 to 1000 km at a time so i know i need something that can handle the long trips at 100km + consistantly but i also want something thats goes a little harder on the street as its also my daily driver

any advice is always welcome

Steve

medium cam that suits some towing this from the crow cams stable might be what your after.

(222002) FORD 6 EA-ED High Torque Cam $395.00

Part Number 222002
Lobe Separation 114 Valve Lift
Inlet Opens 8 B.T.D.C.
Inlet Closes 54 A.B.D.C. 0.472
Exhaust Opens 55 B.B.D.C.
Exhaust Closes 5 A.T.D.C. 0.454
Inlet Duration 242 at 0.050 242 Advertised
Exhaust Duration 240 at 0.050 240 Advertised

Prolly cheaper to throw a low km motor in it mate? Maybe from an ef-au

Yep agree with Carl, be a lot cheaper. AU motors are bullet proof!

Maybe change the intake, exhaust and a mild cam and it would help it out a bit